3210978 Phoenix Contact Terminal Blocks
Part#:3210978
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 5453
Apr 21, 2025
Protective conductor double-level terminal block, connection method: Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3210978 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Insulating material PA
- Nominal cross section 2.5 mm²
- Degree of pollution 3
- Connection in acc. with standard CSA
- Open side panel Yes
- Surge voltage test setpoint 7.3 kV
- Result of flexion and pull-out test Test passed
- Tensile test result Test passed
- Tight fit on carrier NS 35
- Result of temperature-rise test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Color gray
- Result of tight fit on support Test passed
- Requirements, voltage drop ≤ 3.2 mV
- Conductor cross section short circuit testing 4 mm²
- Result of thermal test Test passed
- Number of levels 2
- Rated surge voltage 6 kV
- Overvoltage category III
- Nominal current IN 24 A
- Back of the hand protection guaranteed
- Result of surge voltage test Test passed
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Setpoint 1 N
- Short-time current 0.48 kA
- Oscillation, broadband noise test result Test passed
- Acceleration 30g
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- End cover width 2.2 mm
- Conductor cross section solid min. 0.14 mm²
- Conductor cross section AWG max. 12
- Number of connections 4
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels)
- Nominal voltage UN 500 V
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Bending test rotation speed 10 rpm
- Bending test turns 135
- Conductor cross section tensile test 4 mm²
- Result of aging test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Length 68 mm
- Connection method Push-in connection
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 5.1 27141100
- ETIM 4.0 EC000901
- UNSPSC 11 39121410
- Insulating material group I
- Maximum load current 30 A (with 4 mm² conductor cross section, rigid)
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Power frequency withstand voltage setpoint 1.89 kV
- Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
- Tractive force setpoint 60 N
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Ageing test for screwless modular terminal block temperature cycles 192
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Pitch 5.2 mm
- Height NS 35/15 55 mm
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141100
- ECLASS 11.0 27141141
- ECLASS 9.0 27141141
- ETIM 2.0 EC000901
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock test result Test passed
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Width 5.2 mm
- Note Please observe the current carrying capacity of the DIN rails.
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- Internal cylindrical gage A3
- ECLASS 10.0.1 27141141
- ECLASS 4.0 27141100
- ECLASS 7.0 27141141
- ETIM 6.0 EC000901
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- Relative insulation material temperature index (Elec.; UL 746 B) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 35/7,5 47.5 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section AWG min. 26
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 6.0 27141100
- ETIM 7.0 EC000901
- UNSPSC 18.0 39121410
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Stripping length 8 mm ... 10 mm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ETIM 3.0 EC000901
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$9.96
Stock:
5,453
Select Qty:
$9.96
$9.96 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
