Roman Piszcz

Live support:

Monday - Friday 6AM - 6PM PST

SRB-E-302FWS-TS-OEM19 Schmersal Electronic Components

Schmersal SRB-E-302FWS-TS-OEM19 Standstill monitors and time relays; 2 Safety contacts, 1 Safety Output; Plug-in screw terminals with coding; 1 Signalling output - status safety module; 1 Signalling output - failure massage static; Detects standstill using 1 or 2 impulse sensors; additi
Schmersal

Part#:SRB-E-302FWS-TS-OEM19

Manufacturer:Schmersal

Alt. Part#:103041191

Product Lifecycle:Active

Get a quick Quote!

Standstill monitors and time relays; 2 Safety contacts, 1 Safety Output; Plug-in screw terminals with coding; 1 Signalling output - status safety module; 1 Signalling output - failure massage static; Detects standstill using 1 or 2 impulse sensors; additi

About the manufacturer: Schmersal is one of the manufacturers that offers Electronic Components that you can order at marketplace.quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the SRB-E-302FWS-TS-OEM19 Schmersal price in the box on the right side or send a quick quote.

Product Details

  • Current, Utilisation category DC12
    0.1 A
  • Switching capacity, maximum
    24 VDC
  • Switching capacity, minimum
    10 mA
  • Voltage, Utilisation category DC12
    24 VDC
  • Conduction resistance, maximum
    40 Ω
  • Voltage, Utilisation category DC13
    24 VDC
  • Voltage, Utilisation category AC15
    230 VAC
  • Drop-out delay in case of power failure, typically
    10 ms
  • Restistance to shock
    30 g / 11 ms
  • Depth
    115 mm
  • Cable section, maximum
    2.5 mm²
  • EMC rating
    EMC-Directive
  • Current, Utilisation category AC-15
    4 A
  • Current, Utilisation category DC13
    4 A
  • Current leakage Ir
    1 mA
  • Switching frequency, maximum
    0.3 Hz
  • ON delay at automatic start
    Adjustable
  • Pull-in delay at RESET, typically
    150 ms
  • Voltage drop Ud, maximum
    0.5 V
  • Pull-in delay at automatic start, maximum, typically
    150 ms
  • Drop-out delay in case of emergency, typically
    10 ms
  • Electrical power consumption
    3 W
  • Note (Contact resistance)
    in new state
  • Contact resistance, maximum
    0.1 Ω
  • Rated control voltage at DC, maximum
    28.8 VDC
  • Operating current
    125 mA
  • Rated operating voltage
    24 VDC -20%/+20%, residual ripple max. 10%
  • Rated AC voltage for controls at DC minimum
    19.2 VDC
  • Rated impulse withstand voltage, relay output Uimp
    4 kV
  • Overvoltage category
    III
  • Degree of pollution to IEC/EN 60664-1
    2
  • Rated impulse withstand voltage, semiconductor output Uimp
    0.8 kV
  • Storage and transport temperature, minimum
    -40 °C
  • Rated insulation voltage Ui
    250 V / 50 V
  • Storage and transport temperature, maximum
    +85 °C
  • Resistance to vibrations to EN 60068-2-6
    10 ... 55 Hz, Amplitude 0.35 mm
  • Ambient temperature, maximum
    +60 °C
  • Ambient temperature, minimum
    -25 °C
  • Degree of protection of clips or terminals
    IP20
  • Climatic stress
    EN 60068-2-78
  • Degree of protection of the mounting space
    IP54
  • Electronic Fuse
    Yes
  • Standards
    EN 60204-1, EN 60947-5-1, EN 60947-5-5
  • Width
    22.5 mm
  • Degree of protection of the enclosure
    IP40
  • Height
    98 mm
  • Tightening torque of Clips
    0.5 Nm
  • Enclosure material
    Glass-fibre reinforced thermoplastic, ventilated
  • Cable section, minimum
    0.25 mm²
  • Terminal Connector
    Screw connection, plug-in, rigid or flexible
  • Terminal designations
    IEC 60947-1
  • Mounting
    Snaps onto standard DIN rail to EN 60715
  • Number of signalling outputs
    2
  • Mechanical life, minimum
    10,000,000 Operations
  • Number of fail-safe digital outputs
    1
  • Number of safety contacts
    2
  • Number of LEDs
    6
  • Number of inputs for NO
    1
  • Number of inputs for NC
    2
  • Integral System Diagnostics, status
    Yes
  • Earth connection detection
    Yes
  • Reset edge detection
    Yes
  • Automatic reset function
    Yes
  • Feedback circuit
    Yes
  • Short-circuit recognition
    Yes
  • Start input
    Yes
  • Gross weight
    170 g
  • Material of the contacts, electrical
    Ag-Ni, self-cleaning, positive drive
  • Stop-Category
    0
  • Wire breakage detection
    Yes

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents SRB-E-302FWS-TS-OEM19 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schmersal

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schmersal Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo